Web ViewPoint Enterprise Installation step:

Manual or DSM/SCM Installation Overview

Web ViewPoint Enterprise can be installed using the DSM/SCM tool or can be installed manually.

For DSM/SCM, use the IPSETUP.exe program to upload the files from the CD / PC to the NonStop server. Follow the screens on the Wizard and provide the necessary information as prompted. It is strongly recommended that the user have SUPER.SUPER credentials. Once the IPSETUP program completes ensure that the files listed below have been transferred in the correct format and the file codes are correct.

NOTE: After running the IPSETUP program, please make sure to copy the UMPPAK and SETUPWVP files to a new Install subvolume. If there are additional files (i.e. apart from UMPPAK and SETUPWVP), the RUN SETUPWVP command will fail to extract the files from the UMPPAK file.

For Manual Installation, use the files within WS_SW/WVPE Installation folder and follow the below instructions.

  1. Note: Make sure your <installation-subvol> subvolume is empty before starting the transferring.

** Make sure that the wvp.tar file which is distributed along with the installation package is downloaded to your PC. This file should not be present within the <installation-subvol>

  1. Upload the SETUPWVP and UMPPAK (H, J or L series) to your <installation-subvol> in binary mode.
  2. Run the below set the parameters for Web ViewPoint Enterprise Installation.

   > RUN SETUPWVP

Input “F” for fresh install or “I” for import over from an older version of Web ViewPoint or Web Viewpoint Plus.

NOTE: An older version of Web ViewPoint or Web ViewPoint Plus need NOT be stopped before continuing with import over.

It prompts user to specify the parameters they want to use for Web ViewPoint Enterprise.

  • If the default parameters will not be changed input “S” and enter to Submit. To change the default parameters, follow the examples below.

Examples changing the default parameters:
1. Input number 1 and enter, input desired TCP Process name and enter.

2. Input number 2 and enter, input desired Listening Port # and enter
3. Input number 3 and enter, input desired Store Volume and enter

Event Analyzer:

4.Input number 4 and enter, input desired Collector and enter.
If multiple collectors are needed use comma separate values, (e.g. $0,$ZLOG,$UMP).

Note: If invalid collector is entered the following message will appear “Invalid collector:”and default collector will not change.

Storage Analyzer:

5.Input number 5 and enter, input time (hhmm) and enter.

Note: This is when the collector will run.

6.Input number 6 and enter, input 1 to 180 (days) and enter

    Note: This specifies the maximum number of days to retain data collection.

All data past the retention date will be deleted from the store volume entered in section 3 (e.g. $DSMSCM.SA170228 <$VOL>.).

7. Input number 7 and enter, input 1 to 1000 (days) and enter

Note: Only files that have not been opened for the specified number of days (or more) will be collected.

Recommendation: Keep this value at a reasonable amount, setting this value at a low number may result in SA running slower than normal.

 8. Input number 8 and enter, input 1 to 255 (days) and enter. 

Note: Only files whose index levels are greater than or equal to the specified value will be selected for collection.

Input “Y” if you want to import EA and SA files (without having to stop old version from where you want to import the data) from older WVP Plus instance to Web ViewPoint Enterprise.

Input “N” if you dont want to import EA and SA data.

NOTE: If you want to retain same process names and store volume as the older version in new WVPE, you can first test the new WVPE instance by bringing it up in shadow mode and using STRTPRXY and STOPPRXY to make sure all is ok. Users will need to edit the process names within these proxy files to test if everything looks good before stopping the old istance. Proxy files will help you to temporarily bring up the new WVPE instance with different process names (until you run OBEY STOPPRXY). When ready, you can stop the old instance and restart WVPE with the default process names by running OBEY STOPPRXY (stopping the different process names which you brought up for testing) and then run OBEY STRTWVPE which allows to start with the default process names.

  • Input “N” to edit the parameters within the configuration files and start the collector later.

If necessary, follow the steps below to change the process names and port number within the configuration files.

  1. Edit the “STRTWVPE” configuration file, change the process names to unique process names.

stop $WVPMN
stop $WVLST
stop $WVCL8
stop $WVDRN
stop $WVSKY
stop $WVCMN
stop $WVCIP
stop $WVCLM
stop $WVECL
stop $WSAMR
stop $WSAHR
push #param
clear all

ASSIGN PROGCONF1, UGATCONF
PARAM LISTENER-PROCESS $WVLST
PARAM TCP-PROCESS $ZTC0

RUN PROCMAN/NAME $WVPMN,PRI 160, NOWAIT/

RUN UMPCOL8 /NAME $WVCL8, NOWAIT, TERM $ZHOME/

#DELAY10
RUN UMPDRNE /NAME $WVDRN, NOWAIT, TERM $ZHOME/
#DELAY10
RUN UMPSKYI/NAME $WVSKY, NOWAIT, TERM $ZHOME/
#DELAY10
RUN UMPCMON /NAME $WVCMN, NOWAIT, TERM $ZHOME/
#DELAY10
RUN UMPCIP /NAME $WVCIP, NOWAIT, TERM $ZHOME/
#DELAY10
RUN UCLMEAS  /NAME $WVCLM, NOWAIT, TERM $ZHOME/
RUN EACOLL /NAME $WVECL,NOWAIT,TERM $ZHOME,PRI 120/

RUN SAMGR /NAME $WSAMR,NOWAIT,TERM $ZHOME,PRI 120/
RUN SAHRLY /NAME $WSAHR,NOWAIT,TERM $ZHOME,PRI 120/

ASSIGN CC-FILE ,WVPPCC
ASSIGN CCE-FILE ,WVPPCCE
PARAM  EXECUTION-LOG  *
RUN WVPPREF /NAME $WVSEF,NOWAIT ,TERM $ZHOME,PRI 140/

CLEAR ASSIGN CC-FILE
CLEAR ASSIGN CCE-FILE
CLEAR PARAM  EXECUTION-LOG

pop #param

  1. Edit the “STOPWVPE” configuration file, change the process names to match the ones from the “STRTWVPE” configuration file.

stop $WVPMN
stop $WVLST
stop $WVCL8
stop $WVDRN
stop $WVSKY
stop $WVCMN
stop $WVCIP
stop $WVCLM

status *,prog UMPGATE, stop
status *,prog UMPMEAS, stop
status *,prog EMSLINK, stop
status *,prog TMFMEAS, stop

MEASCOM STOP MEASUREMENT UMPACT, NO ADD

stop $WVECL
stop $WSAMR
stop $WSAHR

  1. Edit the “UGATCONF” file and change the port number.

[BASEOBJECT]
OBJECTFILE     UMPGATE
OBJECTID        OBJID_UMPGATE
PORT                8787 
TITLE                   UMP Gate
MAXPROCESS    20
NUMSTATIC      10
PARAM WEBLOCATIONN /usr/tandem/wvpe
PARAM PATHWAY-01 $SYSTEM.SYSTEM.PATHMON
PARAM EXECUTION-LOG *
ASSIGN  PATHWAYS-FILE   ,PATHWAYS
ASSIGN  SERVERS-FILE ,SERVERS
ASSIGN  TERMS-FILE   ,TERMS
ASSIGN  TCPS-FILE    ,TCPS
ASSIGN  GROUPS-FILE ,GROUPS
ASSIGN  GROUPE-FILE ,GROUPE
ASSIGN  CC-FILE ,WVPPCC
ASSIGN  CCE-FILE     ,WVPPCCE

  1. Edit the “UMPCONF” file and change the process names, CPU numbers and EMS collector if required.
    (i.e. Change the ems collector defined by the “COLLECTOR” parameter to a unique name)

— Supported products are NTS, RA and PMC.

SET PRODUCT_NAME                                                  RA
— SET EMS Log parameters
SET EVENT_LOG   COLLECTOR                                    $0
SET EVENT_LOG   SSID                                                 1500
— Set UMPGATE parameters

comment — CPU number on which the UMPCOL8 backup should run
SET UMPCOL8 BACKUP_CPU                                      2,3,4,5
SET UMPCOL8 BACKUP_RESTART_LIMIT                 50

— Set UMPCMON parameters
comment — CPU number on which the UMPCMON backup should run
SET UMPCMON BACKUP_CPU                                   2,3,4,5
SET UMPCMON BACKUP_RESTART_LIMIT                50

— Set UMPMEAS parameters
SET UMPMEAS SAMPLE_INTERVAL 15
SET UMPMEAS COLLECT_FOR CPU,PROCESS,DISK

— Set UMPSKYI parameters
comment — CPU number on which the UMPSKYI backup should run
SET UMPSKYI BACKUP_CPU                                     1,2,3,4,5
SET UMPSKYI BACKUP_RESTART_LIMIT                  50

— Set EACOLL parameters
comment — CPU number on which the EACOLL backup should run
SET EACOLL BACKUP_CPU                                     2,3,4,5
SET EACOLL BACKUP_RESTART_LIMIT                  50

— Set UMPDRNE parameters
comment — CPU number on which the UMPDRNE backup should run
SET UMPDRNE BACKUP_CPU                                     1,2,3,4,5
SET UMPDRNE BACKUP_RESTART_LIMIT                  50

If necessary, change the EMS collector defined in the “COLLECTOR” parameter of the “UMPCONF” configuration file (default is “$0”) using the following command:
> EMSACOLL /NAME $UMP, NOWAIT/

8. Issue the following command to start the WVP Enterprise host components:

> OBEY STRTWVPE

OSS:

Using OSS mode, set the path to folder (/usr/tandem/wvpe)

Using OSS mode, set the path to /usr/tandem folder within the OSS space (this can be changed to any path).

By default, the path is set to /usr/tandem/wvpe.

You may choose to change this path by changing it in the UGATCONF file within the Web ViewPoint Enterprise subvolume.

  1. Create folder wvpe in /usr/tandem location (example: /usr/tandem/wvpe)

            Command to create a folder in OSS: mkdir wvpe
             cd wvpe

  1. Transfer the tar file (which was sent as a part of install package) to the wvpe folder
  2. Extract the contents of the tar file using tar -o -xvf wvpe.tar command
  3. Edit the host.txt file in the data folder (/usr/tandem/wvpe/data)
  4. Change the Nodename to match that of the installation of the host agent.
  5. Open your browser and enter the IP address specified in the host.txt file followed by port number (specified in the UGATCONF file within Web viewpoint subvolume)

                 Example:  http://192.168.1.100:8787
                To access the lite port, enter the following   http://nnn.nnn.n.nnn:8787/#/lite